Custom Sliding Glass Shower Doors

Most professionally installed sliding shower doors run $2,400 to $3,800, including measurement, glass, hardware, and install. That covers a standard bypass or single-slider in 3/8" tempered clear glass. Wider openings, low-iron glass, premium finishes, and ClearShield coating are itemized separately on the quote.

Typically 10 to 14 days for in-stock sliding kits - about 1 to 3 days to schedule measurement, then a single install day. Custom-fabricated bypass sliders take 7 to 10 business days for fabrication after measurement, plus install scheduling. You'll get a confirmed install date with a 2-hour arrival window.

In-home measurement, delivery of glass and hardware, install by a 2-person crew, leveling and seal of the top track, leak testing, and a walkthrough on operation and care. The visit is typically 2 to 3 hours start to finish - no separate measurement fee, no hourly billing.

Yes - and we recommend it for any sliding door we install. Walls are rarely perfectly plumb, and a 1/4" variation top to bottom is common. The measurement tech checks width at three heights, confirms wall type, and verifies the threshold. The check is included in the install quote.

Single sliders have one fixed panel and one moving panel - they fit openings 44" to 60". Bypass sliders have two panels that slide past each other, fit 56" to 72"+ openings, and allow entry from either side. Bypass is usually the better call for shared bathrooms and tub-to-shower remodels.

Custom-fabricated sliding doors carry a 3-year warranty covering glass, hardware, seals, and install workmanship. In-stock sliding kits installed by our crew carry a 1-year warranty. Both cover roller function, glass defects, and seal integrity under normal use.

Yes - sliding doors are the most popular choice for bathtub conversions because the slide motion clears the tub edge with no swing space. Our Metro single-slider and Eclipse bypass both ship in tub-height (64") and shower-height (76"). We mount to the tub deck and adjacent walls without drilling into the tub interior.

Sliding doors come in 3/8" tempered glass for the premium tier (Metro, Eclipse) or 1/4" tempered glass for the value tier (Sero, Vera, Luna). Glass options: clear, low-iron HD, gray, bronze, rain (textured), and frosted. All glass meets ANSI Z97.1 safety standards and ships with ClearShield coating standard on in-stock kits.

Yes - tile is our most common install scenario. The wall brackets that hold the roller support bar are anchored through tile into the studs or solid blocking behind. We pre-mark drill points, drill on low speed with a carbide bit to prevent cracking, and seal every penetration with silicone.

Custom sliding doors are fabricated to your exact opening at our Manassas facility, with almost any width on the lower side. Custom typically adds 7 to 10 business days. If you're between standard kit sizes, we'll often quote both routes (standard with shims plus custom) so you can compare.

Yes - replacement is one of our most common install types. We remove and haul away your existing shower door, frame, and hardware as part of the install fee. Most replacement projects fit the same 10 to 14 day timeline as a new install - measurement first, then a single install day. No need to demo or remove the old door yourself.

A sliding door is usually the right call for openings 44" or wider, limited swing clearance, alcove or tub-to-shower layouts, and shared bathrooms. It's not the right choice for narrow openings under 44", neo-angle corners, or curbless walk-ins where the bottom track interrupts the floor transition.

Old residue and previous hardware holes are typical and don't usually require tile work. Our crew removes old silicone with a plastic scraper, clears adhesive with a residue remover, and seals previous bracket holes with color-matched caulk before mounting new hardware. Tile replacement is usually only needed if the tile is cracked, loose, or water-damaged.

Yes, with planning during the measurement visit. Curbless layouts may need a low-profile threshold, the right bottom sweep, and careful drain clearance. Bypass sliders often work better than single sliders in curbless layouts because both panels move above the floor area. We confirm threshold, slope, and drain clearance before fabrication.

For most homes, yes. ClearShield is our hydrophobic glass coating, applied at fabrication, that causes water to sheet off instead of beading. It helps reduce the cloudy mineral film that can build up on untreated glass over time. Included free on in-stock kits, typically $170 to $200 on custom orders.

Yes - most bathroom walls have small variations, and that's expected. A 1/4" difference top to bottom is common. Our sliders use wall brackets with built-in adjustment that absorbs angle differences. If your walls are off by more than 1/2", we may recommend custom over standard for a tighter seal.

Yes. Once your kit or custom slider is on site, the install itself typically takes 2 to 3 hours from arrival to walkthrough - single-slider faster, bypass slightly longer. The shower can usually be used about 24 hours after install, after the silicone cures.

Our professional installation service covers the DMV area (Northern Virginia, Maryland, Washington DC). Outside that radius, we ship in-stock sliding kits nationwide for DIY installation with free phone, text, and video support. We can also recommend a local installer or answer installation questions during your DIY project.

It depends on opening width, swing clearance, and bathroom size. Sliding shower doors work best for narrow openings, alcove or tub-to-shower layouts, and shared bathrooms with limited swing space. Hinged doors suit larger bathrooms with clear swing arc. Fixed-glass screens fit walk-in showers. We confirm fit during measurement.

For most tight or shared bathrooms, yes. Sliding shower doors save 24" to 36" of swing clearance, work well for tub-to-shower remodels, and last longer than framed alternatives. They typically run $1,500 to $3,800 installed, less than full enclosures. The trade-off is roughly 50% entry width compared to a hinged door's full opening.

Sliding is best for tight spaces, alcoves, and tub-to-shower remodels. Hinged is best for full open access, larger bathrooms, and curbless layouts. Fixed-glass is best for doorless walk-in designs. We map your bathroom layout, opening size, and clearance during measurement and recommend the configuration that fits best.